Nilmani Fly Ash Machine

Send Email /SMS Enquiry

Technical specification
Production Capacity 2000 Bricks per Hour (L - 230 x W-110 x H75mm)
Hydraulic Pressing Capacity 100 Tons
No. of Bricks Produced Per Stroke 06 Nos
Total Cycle 06 Cycles per minute
Hydraulic Pressure 190 kg / cm2
Total Connected Load 45 HP
Hydraulic Oil - Grade - Servo - 68 400 Liters
Total Required labors 12 to 14 Nos Approx
Wooden Pallet (Material - Hard Board) Length 800 mm x width 300mm x Thickness - 18mm - Qty. 2500 Nos.
Bricks curing time 10 to 12 Days.
Brick Weight 3Kg Approx.
Recipe Fly Ash: 55% Crush Sand: 38% Cement: 07% Approx
Compressive strength 16N/mm2
Raw material consumption - Per day Fly Ash : 25 Ton / Crush Sand: 20 Ton / Cement: 3.5 Ton Approx
Machine Dimension Length 45 Feet X Width 12 Feet X Height 11 Feet
Shade For Machine Length 80ft X Width - 50ft X Height-20ft (Area- 4000 Sq.ft.)
Total Area 20000 Sq. Ft. minimum
100 Tons Hydraulic Pressing capacity and Auto push out on Pallet
Operation / Control Fully Automatic PLC Base.
Machine Efficiency 85% of mentioned capacity.
Pan Mixer 900kgs. Material Mixing Capacity
Rubber Belt Conveyor 24 Feet Length
Box Feeder 1000 Kg capacity
Pre-feed Conveyor to feed 800kg Raw Material into Pan Mixer
Hydraulic Trolley Qty 2Nos.

Other Products Range

Gear Box
Pan Mixer
Vibro Table